Showing 1–16 of 40 results
Model: YZQ-D012
Technical parameters:
Working voltage: 4.0~40V (with reverse connection protection function)
Detection voltage: 0.0~100V
Working current: <20mA
Display mode: 0.28″ LED, red, blue, green, yellow (optional colors)
Dimensions: 30×11.7×9.2 mm (length×width×height)
Installation opening: 23×10 mm
Measurement rate: ≥200mS/time
Measurement accuracy: 3%
Model: YZQ-D011
Technical parameters:
Working voltage: 4.0~40V (with reverse connection protection function)
Detection voltage: 0.0~40V
Working current: <20mA
Display mode: 0.28″ LED, red, blue, green, yellow (optional colors)
Dimensions: 30×11.7×9.2 mm (length×width×height)
Installation opening: 23×10 mm
Measurement rate: ≥200mS/time
Measurement accuracy: 3‰
Model: YZQ-D008
Technical parameters:
Voltage measurement range: 0.0V-100V
Current test range: 0-10A
Power supply range: DC4-30.0V (external independent power supply is required beyond 30V)
Voltage error: ±0.1%
Current error: ±1%
External shunt specification: 75 milliohms
Working current: < 20mA
Refresh rate: about 300mS once
Display mode: double three-digit 0.28″ LED digital tube
Display color: red + red, red + blue. Optional
Lead length: 15cm
Dimensions: 48 x 29 x 22 mm
Mounting hole: 46 x 27 mm
Working temperature: -10℃~65℃
Model: YZQ-D020
Product parameters:
1. Measuring range: 0.00V-30.0V
2. Power supply range: Red DC4.50-30.0V, Green DC4.70-30.0V, Blue DC5.00-30.0V
3. Maximum input: DC30.0V. Note: Input voltage higher than 30V may cause permanent damage!
4. Input impedance: > 100K ohms
5. Working current: Red < 23mA, Green < 18mA, Blue < 13mA
6. Refresh rate: about 300mS once
7. Display mode: three-digit 0.36″ LED digital tube
8. Display color: red, green, blue optional
9. Lead length: 15cm
10. Overall dimensions: 23 * 15 * 10 mm
11. Length including mounting ear: 33mm
12. Working temperature: -10℃~65℃
Model: YZQ-D017
Technical parameters:
Communication interface: SPI
Power supply voltage: 5V
Power supply current: 100mA
Size: 49*76mm
8 buttons 8 LEDs 8-bit digital tube common cathode LED digital tube
Model: YZQ-D016
Technical parameters:
Measuring range: 0.00V-30.0V
Power supply range: Red DC4.50-30.0V,
Input: DC30.0V
Input impedance: > 100K ohms
Working current: Red < 23mA
Refresh rate: about 300mS once
Display mode: three-digit 0.56″ LED digital tube
Display color: red
Lead length: 20cm
Dimensions: 48 *29* 22 mm
Mounting hole: 46 * 27 mm
Working temperature: -10℃~65℃
Model: YZQ-D015
Technical parameters:
Dimensions: 48*29*16mm
Measurement range: 4.5-30V
Minimum input: DC4.5V
Maximum input: DC30V
Display mode: three-digit 0.56″ LED digital tube
Display color: red, green, blue
Refresh rate: about 200mS/time
Working temperature: -10℃~65℃
Model: YZQ-D014
Technical parameters:
Measuring range: AC70V-500V
Power supply range: No need for additional power supply, directly use the measured voltage as the power supply, the range is the same as above
Maximum input: AC500V
Allowable error: ±1%;
Input impedance: > 1M ohm
Working current: red < 23mA, green < 18mA, blue < 17mA
Refresh rate: about 300mS once
Display mode: three-digit “0.56” LED digital tube
Display color: red, green, blue optional
Lead length: 20CM
Dimensions: 48 x 29 x 22 mm
Opening size: 46 x 27 mm
Working temperature: -20℃~65℃
Model: YZQ-D019
Product parameters:
Measuring range: Red DC5-120.0V
Input: DC132V. Note: Input voltage higher than 132V may cause devastating damage!
Input impedance: > 100K ohms
Working current: Red < 23mA
Refresh rate: about 300mS once
Display mode: three-digit “0.56” LED digital tube
Display color: red
Lead length: 20cm
Dimensions: 48 *29 * 22 mm
Opening size: 46 * 27 mm
Working temperature: -20℃~65℃
Model: YZQ-T004
Product parameters：
[Length] 25mm
[Diameter] 21mm
[Shaft diameter] 2mm
[Shaft length] 9mm
[Voltage] 3-6V
Current: 0.35-0.4A
Speed: 17000-18000 rpm
Model: YZQ-D010
Technical parameters:
Display capacity: 16X2 characters
Chip operating voltage: 4.5~5.5V
Operating current: 2.0mA
Module optimal operating voltage: 5.0V
Model: YZQ-T015
Product parameters：
1. Diameter: 28mm
2. Voltage: 5V
3. Step angle: 5.625 x 1/64
4. Reduction ratio: 1:64
5. Weight: 40G
Model: YZQ-T013
Product parameters：
1. Motor diameter: 24mm
2. Motor height: 13mm
3. Output shaft diameter: 2mm
4. Output shaft length: 5-6mm
5. Voltage range: 3-6v
6. Rated voltage: 3v
7. Product weight: 19g
Model: YZQ-D009
Specifications: TM1637 digital tube display module
Communication interface: SPI
Power supply voltage: 5V
Power supply current: 50mA
Dimensions: 42*24mm
Model: YZQ-T002
Product parameters：
DC motor, micro motor
[Length] 25mm
[Diameter] 21mm
[Shaft diameter] 2mm
[Shaft length] 9mm
[Voltage] 3-6V
Model: YZQ-D001
[Product parameters]
(1) Size: 5.0 (inch)
(2) Resolution: 800×480 (dots)
(3) Touch: 5-point capacitive touch
(4) Overall dimensions: 121.11*95.24 (mm)
(5) Product weight (including packaging): 248 (g)
End of content
End of content
购物车里没有产品