5A speed regulating switch DC motor PWM speed regulator
Model: YZQ-S033
Product Features
Specifications: 5A speed switch
Interface: SPI
Power supply voltage: 3.6/12/24/35V
Power supply current: 5A
Showing 17–32 of 62 results
-
-
6 Channel 5V/12V/24V relay module low level trigger development board
Model: YZQ-R009
Module Description
1. Maximum load: AC 250V/10A, DC 30V/10A5:
2. Adopt patch optical isolation, strong driving ability, stable performance; trigger current 5mA;
3. Module operating voltage 5V/12V/24V
Warm Tips：Please tell us which voltage you want when make order -
8 Channel 5V/12V/24V Relay Module
Model: YZQ-R004
Module Description
1.Normally open interface maximum load limit: AC 250V/10A, DC 30V/10A
2. It uses patch optocoupler isolation, with strong driving ability and stable performance; trigger current
5mA;
3. The module operating voltage is 5V12V24V
4. The module can be set to high or low level trigger through jumpers 5. Fault-tolerant design, even if the control line is broken, the relay will not work;
6. Power indicator light (green), relay status indicator light (red) 7. The interface design is user-friendly, all interfaces can be directly connected through the terminal block
lead out, very convenient
8. There are 4 fixing bolt holes -
8 Channel 5V/12V/24V relay module low level trigger development board
Model: YZQ-R010
Module Description
Maximum load on normally open pin:AC 250V/10A, DC 30V/10A
Trigger current :5mA
Size :138mm * 56mm* 18.5mm
Weight:120g
Voltage 5V/12V/24V at optional
Warm Tips：Please tell us which voltage you want when make order -
Breadboard Power Module
Model: YZQ-S036
Product Features
1. Suitable for MB102 breadboard
2. Input voltage: 6.5-12V (DC) or USB power supply
3. Output voltage: 3.3V, 5V switchable
4. Maximum output current: upper and lower two channels are independently controlled and can be switched to 0V, 3.3V, 5V
5. Two sets of 3.3V, 5V DC output pins are onboard for external lead-out -
BTS7960 Smart Car Motor Drive Module
Model: YZQ-S020
Product parameters:
Communication interface: SPI
Power supply voltage: 6V-27V
Power supply current: 43A
Size: 50*50mm -
CN3791 MPPT Solar Panel Lithium Battery Charging Module
Model: YZQ-S040
Product Features
1. Input voltage: 6V /12V
2. Output voltage: 3.7V /4.2V
3. Interface: 2pin PH2.0/JST
4. Solar panel high power point tracking function
5. Complete charging management for single lithium battery
6. Charging current up to 2A
7. PWM switching frequency: 300KHz
8. Constant voltage charging voltage: 4.2V±1% -
DAC Breakout – MCP4725 Module
Model: YZQ-S034
Product Features
Specifications: MCP4725 Red Board
Interface: SPI
Power supply voltage: 2.7-5V
Power supply current: 1-20MA -
DC-DC adjustable step-down module 12V to 5V3A
Model: YZQ-S025
Product parameters:
Specifications: DC-DC adjustable step-down module
Communication interface: SPI
Power supply voltage: 4-20V
Power supply current: 3A
Size: 20*11*5 mm -
EGS002 Pure Sine Wave Inverter Driver Board
Model: YZQ-S032
Product Features
* 5V single power supply
* 4 pure sine wave output frequencies set by pins: 50Hz pure sine wave fixed frequency 60Hz pure sine wave fixed frequency 0-100Hz pure sine wave frequency adjustable 0-400Hz pure sine wave frequency adjustable
* Unipolar and bipolar modulation modes
* Built-in dead zone control, 4 dead zone times set by pins: 300nS dead zone time 500nS dead zone time 1.0uS dead zone time 1.5uS dead zone time
* External 12MHz crystal oscillator
* PWM carrier frequency 23.4KHz -
ENC28J60 module SPI interface
Model: YZQ-S028
Product parameters:
1.ENC28J60/SS chip, SSOP28 package
2.25MHZ crystal
3.RJ45 connector HR911105A isolation transformer
4.3.3V pin power board AMS1117-3.3 chip
5.SPI communication interface
6.2*6 two-pin connector
7.3.3V power supply
8.10M Ethernet interface
9.SPI interface connected to 8-bit, 16-bit, 32-bit microcontroller -
ESP-01S 8266 WIFI module
Model: YZQ-S014
Technical parameters:
Working voltage: 3.0V-3.6VWIFL
Mode: STATION/AP/STATION+AP
Communication distance: 100M
Antenna: PCB onboard antenna
SPL FLASH: 1MB
Onboard PCB antenna gain: 3DBI
Wireless standard: 802.11B/G/N -
ESP8266 WIFI Bluetooth 0.96 inch OLED module
Model: YZQ-S023
Product parameters:
Power supply voltage: 5V
Power supply current: 100A
Communication interface: SPI
Size: 28*63mm -
FT232RL USB to TTL serial port module
Model: YZQ-S0006
Product performance:
1. Standard interface, compatible with various Arduino official controllers
2. Original FT232 chip, stable performance
3. With power, send, receive indicator lights, the working status is clear at a glance
4. With 3.3V and 5V
5. Can be used as a common USB to serial port TTL module, download STC microcontroller -
GY-NEO-6M/7M/8M GPS module with antenna
Model: YZQ-S030
Product parameters:
1. The default baud rate of this module is 9600.
2. Power supply voltage 3.3v-5v (can be directly connected to 5v or 3.3v power supply, core operating voltage 3.3v)
3. Can be directly connected to 3.3v or 5v microcontroller 10 for communication. -
HC-05 Bluetooth Wireless Module
Model: YZQ-S013
Technical parameters:
1.PCB size: 37.3mm (length) * 15.5mm (width)
2.Weight: 3.5g
3.Input voltage: 3.6V–6V
VCC: Connect to the positive pole of the power supply
GND: Connect to the negative pole of the power supply
RXD: Receiver, the Bluetooth module receives data from other devices; normally connect to the transmitter TXD of other devices
TXD: Transmitter, the Bluetooth module sends data to other devices; normally connect to the receiver RXD of other devices
EN: Enable terminal, connect to 3.3V when entering AT mode
End of content
End of content