Showing 17–32 of 283 results
Parameters:
1. Objective magnification: 1
2. Eyepiece magnification: 16 times
3. Instrument magnification: digital 1200 times
4. Working distance mm: 10mm
5.Pixel: HD 12 megapixel
6.Plug-in or built-in ultra-ithium batterye
7.Display screen: 7-inch HD LCD displaye
8.Magnification: 1-1200 xcontinuous amplification system
Model: YZQ-T004
Product parameters：
[Length] 25mm
[Diameter] 21mm
[Shaft diameter] 2mm
[Shaft length] 9mm
[Voltage] 3-6V
Current: 0.35-0.4A
Speed: 17000-18000 rpm
Model: YZQ-DP002
Product Features
Model: 140/560/840pcs
Box size: 165×55×10mm
Wire length: 2, 5, 7, 10, 12, 15, 17, 20, 22, 25, 50, 75, 100, 125MM
Model: YZQ-R011
Module Description
Maximum load of normally-open port:AC 250V/10A;DC 30V/10A
Trigger current :3mA
Pack Size:20 x 10cm x 5cm
Weight:400g
Working voltage:5V / 12V /24V at Optional
Warm Tips：Please tell us which voltage you want when make order
Model: YZQ-D010
Technical parameters:
Display capacity: 16X2 characters
Chip operating voltage: 4.5~5.5V
Operating current: 2.0mA
Module optimal operating voltage: 5.0V
Model: YZQ-R002
Module Description
1.Normally open interface maximum load limit: AC 250V/10A, true DC 30V/10A
2. It uses patch optocoupler isolation, with strong driving ability and stable performance; trigger current
5mA;
3. The module operating voltage is 5V12V24V
4. The module can be set to high or low level trigger through jumpers 5. Fault-tolerant design, even if the control line is broken, the relay will not work;
6. Power indicator light (green), relay status indicator light (red) 7. The interface design is user-friendly, all interfaces can be directly connected through the terminal block
lead out, very convenient
8. There are 4 fixing bolt holes
Model: YZQ-R007
Module Description
Supply voltage: 5V or 12V
Trigger level: 5V
Version: 3V-7V trigger
12V version: 3.3V-12V
Trigger current: about 5mA (if controlled by 3.3V microcontroller, 10 push-pull function is required)
Control voltage: AC0-250V or DC0-30V
Control current: 0-7A
Module size: 41*33mm
Warm Tips：Please tell us which voltage you want when make order
Model: YZQ-S024
Product parameters:
1. Applicable to lithium batteries with a nominal voltage of 3.7V and a full voltage of 4.2V
2. Product size: 45*15*3.4mm (standard version)
3. Product weight: 2.9g (standard version)
4. Charging voltage: 8.4V – 9.0V
5. Continuous discharge current (upper limit): 20A (If the heat dissipation environment is not good, please reduce the load current)
5. Continuous charging current (upper limit): 10A
Model: YZQ-S022
Product parameters:
1. Operating voltage: AC 220V
2. Maximum power: 2000W
3. Voltage regulation: AC 50-220V
4. Specifications: High temperature resistant FR-4 circuit board, circuit board 36MM*48MM
5. External dimensions: 48MM*60MM (knob direction)*28MM (height)
6. Silicon controlled voltage withstand up to 1200V/current 25A
7. 1.6mm thickened epoxy copper clad board
8. This voltage regulator is equipped with a peak voltage absorption circuit to effectively protect high-power silicon controlled rectifiers, with a longer life and more durability.
Type:YZQ-8869-04
Material: plastic/plastic
Product Model:20CM/30CM/50CM extension cord
Model: YZQ-3D001
Product Features
Color: Black
Maximum Current: 25A (Enhanced Heat Dissipation)
Model: YZQ-T015
Product parameters：
1. Diameter: 28mm
2. Voltage: 5V
3. Step angle: 5.625 x 1/64
4. Reduction ratio: 1:64
5. Weight: 40G
Model: YZQ-DP006
Product Features
Model: 2P/3P/4P/6P/8P
2.Wire length: 2.54MM/20CM
Model: YZQ-CK006
Features:
Shipping list:
3D assembly drawing * 1
Car chassis * 1
Reduction motor 1:48 * 2
Wheels * 2
High-precision 20-line speed code disk * 2
Fastener * 4
Universal wheel * 1
Four-cell battery box * 1
Long screws * 4
Short screws (8 long, 2 short)
Nuts * 10
Model: YZQ-S009
3 series 40A with balanced/enhanced version
1. Product name: 3 series 12.6V 40A lithium battery protection board
2. Charging voltage: DC12.6V~13.6V
3. Continuous discharge current: peak 40A (if the heat dissipation environment is not good, please reduce the load current)
4. Continuous charging current: peak 20A
5. Product size: 41*55*4mm (enhanced board)
41*61*4mm (with balanced)
6. Applicable options: Applicable to lithium batteries with nominal voltage of 3.7V and fully charged 4.2V (including 18650, 26650, polymer lithium batteries) and can be used with electric drills below 170W
End of content
End of content
购物车里没有产品